Field-effect Transistor Sensor Research Articles

Machine Learning Discrimination and Ultrasensitive Detection of Fentanyl Using Gold Nanoparticle-Decorated Carbon Nanotube-Based Field-Effect Transistor Sensors.

The opioid overdose crisis is a global health challenge. Fentanyl, an exceedingly potent synthetic opioid, has emerged as a leading contributor to the surge in opioid-related overdose deaths. The surge in overdose fatalities, particularly due to illicitly manufactured fentanyl and its contamination of street drugs, emphasizes the urgency for drug-testing technologies that can quickly and accurately identify fentanyl from other drugs and quantify trace amounts of fentanyl. In this paper, gold nanoparticle (AuNP)-decorated single-walled carbon nanotube (SWCNT)-based field-effect transistors (FETs) are utilized for machine learning-assisted identification of fentanyl from codeine, hydrocodone, and morphine. The unique sensing performance of fentanyl led to use machine learning approaches for accurate identification of fentanyl. Employing linear discriminant analysis (LDA) with a leave-one-out cross-validation approach, a validation accuracy of 91.2% is achieved. Meanwhile, density functional theory (DFT) calculations reveal the factors that contributed to the enhanced sensitivity of the Au-SWCNT FET sensor toward fentanyl as well as the underlying sensing mechanism. Finally, fentanyl antibodies are introduced to the Au-SWCNT FET sensor as specific receptors, expanding the linear range of the sensor in the lower concentration range, and enabling ultrasensitive detection of fentanyl with a limit of detection at 10.8fgmL-1.

A Host Receptor Nanodisc-Based Biosensor Platform for the Detection of a Specific Virus and Its Variants.

The host receptor is a key element in the initial stage of the virus entry into the host. The use of this host receptor is valuable as a sensing element for selectively and sensitively detecting specific viruses. Also, viruses tend to escape neutralizing antibodies through viral mutation but still utilize the cell entry process using the same host receptors, so it would be a powerful detection tool even for the mutant viruses. The angiotensin-converting enzyme 2 (ACE2) receptor, which is the representative host receptor, performs an essential function in facilitating viral penetration by interacting with the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein. In this study, we introduce a novel approach, where we fabricated a carbon nanotube field-effect transistor (CNT-FET) sensor and combined it with ACE2 receptor-embedded nanodisc (ND). ACE2 was produced using an E. coli expression system, purified, and integrated into the ND platform. ACE2 NDs showed robust functionality through interactions with a pseudotyped virus (PV) containing the spike protein, enabling sensitive detection of both SARS-CoV-2 and its genetic variations at 102 PFU/mL. The ACE ND-based sensor exhibited excellent selectivity by accurately differentiating SARS-CoV-2 wild-type and variants (Omicron, Delta) from other viruses (ZIKA and MERS-CoV). As a result of comparative analysis, ACE2 ND showed approximately 49% superior long-term functionality up to the second week compared to that of soluble ACE2. These findings highlight the high selectivity and sensitivity of host receptor-based sensors for detecting viral variants and provide a promising tool to prevent the spread of unknown viruses.

Comparative Study of Field-Effect Transistors Based on Graphene Oxide and CVD Graphene in Highly Sensitive NT-proBNP Aptasensors

Graphene-based materials are actively being investigated as sensing elements for the detection of different analytes. Both graphene grown by chemical vapor deposition (CVD) and graphene oxide (GO) produced by the modified Hummers’ method are actively used in the development of biosensors. The production costs of CVD graphene- and GO-based sensors are similar; however, the question remains regarding the most efficient graphene-based material for the construction of point-of-care diagnostic devices. To this end, in this work, we compare CVD graphene aptasensors with the aptasensors based on reduced GO (rGO) for their capabilities in the detection of NT-proBNP, which serves as the gold standard biomarker for heart failure. Both types of aptasensors were developed using commercial gold interdigitated electrodes (IDEs) with either CVD graphene or GO formed on top as a channel of liquid-gated field-effect transistor (FET), yielding GFET and rGO-FET sensors, respectively. The functional properties of the two types of aptasensors were compared. Both demonstrate good dynamic range from 10 fg/mL to 100 pg/mL. The limit of detection for NT-proBNP in artificial saliva was 100 fg/mL and 1 pg/mL for rGO-FET- and GFET-based aptasensors, respectively. While CVD GFET demonstrates less variations in parameters, higher sensitivity was demonstrated by the rGO-FET due to its higher roughness and larger bandgap. The demonstrated low cost and scalability of technology for both types of graphene-based aptasensors may be applicable for the development of different graphene-based biosensors for rapid, stable, on-site, and highly sensitive detection of diverse biochemical markers.

Lead ions detection using CVD-grown ReS2-FET with the facilitation of a passivation layer

Field-effect transistor (FET)-based heavy-metal detection is garnering attention due to its heightened sensitivity, affordability, convenient fabrication, and portability. Flower-like rhenium disulfide (ReS2) offers potential for high-performance FET sensors, but direct exposure of channel materials to the ionic solution without a passivation layer results in multiple signals arising from the ionic transmission, doping impact, and gating effect. Introducing a passivation layer to the channel surface enhances sensor sensitivity without compromising device performance, ensuring conductance changes are primarily due to the gating effect. Here, a large surface area of Chemical Vapor Deposition (CVD)-grown vertically aligned ReS2 is employed in the FET-based sensor, and the utilization of the HfO2 layer is to isolate analytes from the elements of the conducting channel. For real-time lead monitoring in a water environment, it exhibits strong electrical stability, an impressive LoD (≈2 nM), a rapid response time (≈1.1 sec), and notable selectivity. Additionally, sensing operations are characterized by developing a unique amplifier circuit by integrating the fabricated sensor, contributing to advancements in sensor integration to detect hazardous metals in industrial electronics. These results underscore the potential for enhancing the performance of ion-sensitive FETs through structural optimization and improvements to the fundamental sensor mechanism.

High-Performance Ni3(HHTP)2 Film-Based Flexible Field-Effect Transistor Gas Sensors.

Conductive metal-organic frameworks (MOFs) have received increasing attention in recent years and present high application potential as sensing elements in electronic sensors. In this study, flexible field-effect transistor (FET) sensors based on conductive MOF, i.e., Ni3(HHTP)2, have been constructed. This Ni3(HHTP)2 sensor has high sensitivity (detection limit of 56 ppb) as well as superior selectivity for NO2 detection at room temperature, which is demonstrated by accurate gas detection in a mixed gas atmosphere. Moreover, by employing six flexible substrates, i.e., polyimide (PI), tape (PET), facemask, paper cup, tablecloth, and take-out bag (textile), we successfully demonstrate the universality of the flexible sensor construction with conductive MOF as sensing film on various substrates. This study of conductive MOF-based flexible electronic sensors offers a new opportunity for a wide range of sensing applications with wearable and portable electronic devices.

Ultrasensitive detecting of dopamine in complex components by field effect transistor sensor based on the synergistic enhancement effect and overcoming debye length limitations

Field effect transistor (FET) has attracted high attention in biomolecules detection. However, the sensitivity of FET-based biosensors is often limited by the charge screening effect. In addition, the facile and ultra-sensitive detection for small biomolecules, which possess weak charge or electroneutral, remains to be studied. Here, the self-assembled monolayer AuNPs/three-dimensional (3D) crumpled graphene FET is structured for a biosensor by shrinking flexible polystyrene (PS) films through heat treatment method and realized label-free and ultra-sensitive detection of dopamine (DA) using DA aptamer as probes immobilized on the AuNPs/3D crumpled graphene surface. The nanoscale deformation caused by thermal expansion effect of flexible graphene/PS can effectively reduce charge screening and the synergistic application of crumpled graphene and AuNPs can promote electron transfer and the graphene carrier concentration, leading to conductivity increase and hydrophilicity enhancement of 3D graphene. In addition, the binding of DA aptamer to DA will cause conformational changes of the aptamer molecule, which affects the charge transport properties of the sensor, thus improving its selectivity and stability. The biosensor can also easily distinguish interfering substances for DA detection in complex components (PBS, human urine, and fetal calf serum) with the detection limits as low as 60, 240 and 316 zM (10−19–10−11 M), respectively. DA released from exocytosis induced by K+ stimulation was selectively detected. The results show that the biosensor can be used as an excellent tool for ultrasensitive molecular recognition and detecting the effects of exogenous reagents on living cells, which is promising for clinical diagnosis and early disease prevention.

A Drug Molecule-Modified Graphene Field-Effect Transistor Nanosensor for Rapid, Label-Free, and Ultrasensitive Detection of Estrogen Receptor α Protein.

Estrogen receptor α (ERα) is an important biomarker in breast cancer diagnosis and treatment. Sensitive and accurate detection of ERα protein expression is crucial in guiding selection of an appropriate therapeutic strategy to improve the effectiveness and prognosis of breast cancer treatment. Herein, we report a liquid-gated graphene field-effect transistor (FET) biosensor that enables rapid, sensitive, and label-free detection of the ERα protein by employing a novel drug molecule as a capture probe. The drug molecule was synthesized and subsequently immobilized onto the sensing surface of the fabricated graphene FET, which was able to distinguish the ERα-positive from the ERα-negative protein. The developed sensor not only demonstrated a low detection limit (LOD: 2.62 fM) but also achieved a fast response to ERα protein samples within 30 min. Moreover, depending on the relationship between the change of dirac point and the ERα protein concentrations, the dissociation constant (Kd) was estimated to be 7.35 ± 0.06 pM, indicating that the drug probe-modified graphene FET had a good affinity with ERα protein. The nanosensor was able to analyze ERα proteins from 36 cell samples lysates. These results show that the graphene FET sensor was able to differentiate between ERα-positive and ERα-negative cells, indicating a promising biosensor for the ultrasensitive and rapid detection of ERα protein without antibody labeling.

Electro-Optical Multiclassification Platform for Minimizing Occasional Inaccuracy in Point-of-Care Biomarker Detection.

On-site diagnostic tests that accurately identify disease biomarkers lay the foundation for self-healthcare applications. However, these tests routinely rely on single-mode signals and suffer from insufficient accuracy, especially for multiplexed point-of-care tests (POCTs) within a few minutes. Here, this work develops a dual-mode multiclassification diagnostic platform that integrates an electrochemiluminescence sensor and a field-effect transistor sensor in a microfluidic chip. The microfluidic channel guides the testing samples to flow across electro-optical sensor units, which produce dual-mode readouts by detecting infectious biomarkers of tuberculosis (TB), human rhinovirus (HRV), and group B streptococcus (GBS). Then, machine-learning classifiers generate three-dimensional (3D) hyperplanes to diagnose different diseases. Dual-mode readouts derived from distinct mechanisms enhance the anti-interference ability physically, and machine-learning-aided diagnosis in high-dimensional space reduces the occasional inaccuracy mathematically. Clinical validation studies with 501 unprocessed samples indicate that the platform has an accuracy approaching 99%, higher than the 77%-93% accuracy of rapid point-of-care testing technologies at 100% statistical power (>150 clinical tests). Moreover, the diagnosis time is 5min without a trade-off of accuracy. This work solves the occasional inaccuracy issue of rapid on-site diagnosis, endowing POCT systems with the same accuracy as laboratory tests and holding unique prospects for complicated scenes of personalized healthcare.

Comparing solution-gate and bottom-gate nanowire field-effect transistors on pH sensing with different salt concentrations and surface modifications

Field-effect transistors (FETs) have been developed as pH sensors by using various device structures, fabrication technologies, and sensing film materials. Different transistor structures, like extended-gate (EG) FETs, floating-gate FET sensors, and dual-gate (DG) FETs, can enhance the sensor performance. In this article, we report the effects of using solution-gate and bottom-gate FET configurations on pH sensing and investigate the influence of different ionic concentrations of buffers in the measured signals. The surface charge of hafnium dioxide (HfO2) affected by the buffer pH, with/without the modification of polyethylene glycol (PEG) terminated with hydroxyl groups, and the location of applied gate voltage are vital factors to the sensor performance in pH sensing. Based on the results, the solution-gate FET exhibits good pH sensitivity even in the high ionic strength solutions of bis-tris propane (BTP), and these values of pH sensitivity are close to the Nernst limit (59.2 mV/pH). In general, silane-PEG-OH modification can reduce the deviations of measured signals in pH sensing. The performance of bottom-gate FET is inferior in the BTP buffers with high ionic solutions but suitable to be operated in low ionic concentrations, such as 0.1, 1, and 10 mM BTP buffers. The size of the ions was also studied and discussed. The solution-gate FET demonstrates excellent performance under high ionic strengths, meaning a more significant potential for detecting biological molecules under physiological conditions.

Recent Progress of Exhaled Gas‐Based Diagnosis Based on Field Effect Transistor Sensors

AbstractExhaled breath‐based disease diagnosis is an ancient technique, and the application of this technique is rapidly developing for disease quick testing, such as viral infection, asthma, chronic kidney disease, and so on. Among the diagnostic tools, an exhaled breath‐based test has demonstrated the merits of being non‐invasive, convenient, quick, and comfortable. In this review, the exhaled breath diagnosis via the gaseous part of the breath is the major focus. First, the summary of state‐of‐art studies based on exhaled gas detection is described. Second, typical disease‐related exhaled gas and their measurements are described. Finally, the various structure of field effect transistor (FET)‐type sensors for gas‐based disease detection is discussed in detail. This review may inspire new research ideas and directions for applying FET‐type sensors to quick disease detection via the gaseous route.

High enhancement of sensitivity and reproducibility in label-free SARS-CoV-2 detection with graphene field-effect transistor sensors through precise surface biofunctionalization control

The COVID-19 pandemic has taught us valuable lessons, especially the urgent need for a widespread, rapid and sensitive diagnostic tool. To this, the integration of bidimensional nanomaterials, particularly graphene, into point-of-care biomedical devices is a groundbreaking strategy able to potentially revolutionize the diagnostic landscape. Despite advancements in the fabrication of these biosensors, the relationship between their surface biofunctionalization and sensing performance remains unclear. Here, we demonstrate that the combination of careful sensor fabrication and its precise surface biofunctionalization is crucial for exalting the sensing performances of 2D biosensors. Specifically, we have biofunctionalized Graphene Field-Effect Transistor (GFET) sensors surface through different biochemical reactions to promote either random/heterogeneous or oriented/homogeneous immobilization of the Anti-SARS-CoV-2 spike protein antibody. Each strategy was thoroughly characterized by in-silico simulations, physicochemical and biochemical techniques and electrical characterization. Subsequently, both biosensors were tested in the label-free direct titration of SARS-CoV-2 virus in simulated clinical samples, avoiding sample preprocessing and within short timeframes. Remarkably, the oriented GFET biosensor exhibited significantly enhanced reproducibility and responsiveness, surpassing the detection sensitivity of conventional non-oriented GFET by more than twofold. This breakthrough not only involves direct implications for COVID-19 surveillance and next pandemic preparedness but also clarify an unexplored mechanistic dimension of biosensor research utilizing 2D-nanomaterials.

Rapid and Easy Detection of Microcystin-LR Using a Bioactivated Multi-Walled Carbon Nanotube-Based Field-Effect Transistor Sensor.

In this study, we developed a multi-walled carbon nanotube (MWCNT)-based field-effect transistor (MWCNT-FET) sensor with high sensitivity and selectivity for microcystin-LR (MC-LR). Carboxylated MWCNTs were activated with an MC-LR-targeting aptamer (MCTA). Subsequently the bioactivated MWCNTs were immobilized between interdigitated drain (D) and source (S) electrodes through self-assembly. The top-gated MWCNT-FET sensor was configured by dropping the sample solution onto the D and S electrodes and immersing a Ag/AgCl electrode in the sample solution as a gate (G) electrode. We believe that the FET sensor's conduction path arises from the interplay between the MCTAs, with the applied gate potential modulating this path. Using standard instruments and a personal computer, the sensor's response was detected in real-time within a 10 min time frame. This label-free FET sensor demonstrated an impressive detection capability for MC-LR in the concentration range of 0.1-0.5 ng/mL, exhibiting a lower detection limit of 0.11 ng/mL. Additionally, the MWCNT-FET sensor displayed consistent reproducibility, a robust selectivity for MC-LR over its congeners, and minimal matrix interferences. Given these attributes, this easily mass-producible FET sensor is a promising tool for rapid, straightforward, and sensitive MC-LR detection in freshwater environments.

A 'Frugal' EGFET Sensor for Waterborne H2S.

Hydrogen sulphide (H2S) is a toxic gas soluble in water, H2Saq, as a weak acid. Since H2Saq usually originates from the decomposition of faecal matter, its presence also indicates sewage dumping and possible parallel waterborne pathogens associated with sewage. We here present a low footprint ('frugal') H2Saq sensor as an accessible resource for water quality monitoring. As a sensing mechanism, we find the chemical affinity of thiols to gold (Au) translates to H2Saq. When an Au electrode is used as a control gate (CG) or floating gate (FG) electrode in the electric double layer (EDL) pool of an extended gate field effect transistor (EGFET) sensor, EGFET transfer characteristics shift along the CG voltage axis in response to H2Saq. We rationalise this by the interface potential from the adsorption of polar H2S molecules to the electrode. The sign of the shift changes between Au CG and Au FG, and cancels when both electrodes are Au. The sensor is selective for H2Saq over the components of urine, nor does urine suppress the sensor's ability to detect H2Saq. Electrodes can be recovered for repeated use by washing in 1M HCl. Quantitatively, CG voltage shift is fitted by a Langmuir-Freundlich (LF) model, supporting dipole adsorption over an ionic (Nernstian) response mechanism. We find a limit-of-detection of 14.9 nM, 100 times below potability.

Ultrasensitive sensing urinary cystatin C via an interface-engineered graphene extended-gate field-effect transistor for non-invasive diagnosis of chronic kidney disease

Early chronic kidney disease (CKD) has strong concealment and lacks an efficient, non-invasive, and lable-free detection platform. Cystatin C (Cys C) in urine is closely related to the progress of CKD (especially at the early stage), which is an ideal endogenous marker to evaluate the impairment of renal function. Thus, the accurate detection of urinary Cys C (u-Cys C) is great significant for early prevention and treatment and delaying the course of the disease of CKD patients. Herein, we developed an extended-gate field-effect transistor (EG-FET) sensor for ultrasensitive detection of u-Cys C, which consists of a monolithic interface-engineered graphene EG electrode array and a commercially available MOSFET. Laser-induced graphene (LIG) loaded with sputtered Au NPs in the presence of adhesive Cr (Au NPs/Cr/LIG) boosts the electrical performance of the EG electrode. Meanwhile, Au NPs also serve as linkers to immobilize papain that can selectively form protein complexes with Cys C. Supported by the synergistic effect of multilevel interface-engineered graphene, our sensor exhibits a good linear correlation within the u-Cys C concentration range of 5 ag/μL to 50 ng/μL with low detection limit of 0.05 ag/μL. Our work makes accurate, specific and rapid detection of u-Cys C feasible and promising for early screening for CKD.

New Approach for Enhancing Sensitivity in Liquid‐Gated Nanowire FET Biosensors Under Optical Excitation

AbstractThe results obtained for liquid‐gated (LG) nanowire (NW) field‐effect transistor (FET) sensors analyzed in divalent ion (MgCl2) solutions, which play a crucial role in the human body, are reported. Liquid‐gated NW FET sensors fabricated in‐house are investigated using I–V characteristics and noise spectroscopy in a wide range of voltages and different intensities of optical infrared irradiation. A new effect is revealed under the influence of external optical excitation. The effect allows for the control of characteristic times of single‐trap phenomena: capture time to a single trap, emission time from the trap, and its ratio represented by the dimensionless ratio parameter (R‐factor). These parameters enabled an improvement in sensor sensitivity. The findings open prospects for controlling charge states in LG NW FET structures to optimize new parameters for achieving ultrahigh sensitivity in biosensors.

Size-Based Norfentanyl Detection with SWCNT@UiO-MOF Composites.

Single-walled carbon nanotube (SWCNT)@metal-organic framework (MOF) field-effect transistor (FET) sensors generate a signal through analytes restricting ion diffusion around the SWCNT surface. Four composites made up of SWCNTs and UiO-66, UiO-66-NH2, UiO-67, and UiO-67-CH3 were synthesized to explore the detection of norfentanyl (NF) using SWCNT@MOF FET sensors with different pore sizes. Liquid-gated FET devices of SWCNT@UiO-67 showed the highest sensing response toward NF, whereas SWCNT@UiO-66 and SWCNT@UiO-66-NH2 devices showed no sensitivity improvement compared to bare SWCNT. Comparing SWCNT@UiO-67 and SWCNT@UiO-67-CH3 indicated that the sensing response is modulated by not only the size-matching between NF and MOF channel but also NF diffusion within the MOF channel. Additionally, other drug metabolites, including norhydrocodone (NH), benzoylecgonine (BZ), and normorphine (NM) were tested with the SWCNT@UiO-67 sensor. The sensor was not responding toward NH and or BZ but a similar sensing result toward NM because NM has a similar size to NF. The SWCNT@MOF FET sensor can avoid interference from bigger molecules but sensor arrays with different pore sizes and chemistries are needed to improve the specificity.

Biosensing with Surface-Charge-Modulated Graphene Field-Effect Transistors beyond Nonlinear Electrolytic Screening.

In field-effect transistor (FET) biosensors, charge screening in electrolyte solutions limits the sensitivity, thereby restricting the applicability of FET sensors. This is particularly pronounced in graphene FET (GFET) biosensors, where the bare graphene surface possesses a strongly negative charge, which impedes the high sensitivity of GFETs owing to nonlinear electrolytic screening at the interfaces between graphene and liquid. In this study, we counteracted the negative surface charge of graphene by decorating positively charged compounds and demonstrated the sensing of C-reactive protein (CRP) with surface-charge-modulated GFETs (SCM-GFETs). We integrated multiple SCM-GFETs with anti-CRP antibodies and nonfunctionalized GFETs into a chip and measured differentials to eliminate background changes to improve measurement reliability. The FET response corresponded to the fluorescence images, which visualized the specific adsorption of CRP. The estimated dissociation constant was consistent with previously reported values; this supports the conclusion that the results are attributed to specific adsorption. Conversely, the signal in GFETs without decoration was obscured by noise because of nonlinear electrolytic screening, further emphasizing the significance of surface-charge modulation. The limit of detection of the system was determined to be 2.9 nM. This value has the potential to be improved through further optimization of the surface charges to align with specific applications. Our devices effectively circumvent nonlinear electrolytic screening, opening the door for further advancements in GFET biosensor technology.

Acid-Modulated Peptide Synthesis for Application on Oxide Biosensor Interfaces.

In this paper we report an acid-modulated strategy for novel peptide microarray production on biosensor interfaces. We initially selected a controlled pore glass (CPG) as a support for solid-phase peptide synthesis (SPPS) to implement a chemistry that can be performed at the interface of multiple field effect transistor (FET) sensors, eventually to generate label-free peptide microarrays for protein screening. Our chemistry uses a temporary protection of the N-terminal amino function of each amino acid building block with a tert-butyloxycarbonyl (Boc) group that can be removed after each SPPS cycle, in combination with semi-permanent protection of the side chains of trifunctional amino acid residues. Such a protection scheme with a well-proven record of application in conventional, batchwise SPPS has been fine-tuned for optimal performance on CPG and, from there, translated to SPR chips that allow layer-by-layer monitoring of amino acid coupling. Our results validate this acid-modulated synthesis as a feasible approach for producing peptides in high yields and purity on flat glass surfaces, such as those in bio-FETs.

Discriminative Analysis of NOx Gases by Two-Dimensional Violet Phosphorus Field-Effect Transistors.

Two-dimensional violet phosphorus (VP) has emerged as a new sensing material in various sensing applications due to its unique electrical properties and high stability among allotropes of phosphorus. Currently, the research of the VP-based analysis method is at the early stage. In this work, a VP nanosheet-based field-effect transistor (FET) sensor is reported for the detection of NO2 and N2O gases with extraordinary sensing performance. This sensor can achieve excellent sensitivity of up to ∼50% current change/ppm and a low detection limit of 5.9 ppb and enables the NO2 analysis in various mixed gases. Moreover, this sensor can effectively distinguish between NO2 and N2O gases, which is a big challenge for current FET or chemiresistor gas sensors. The different sensing behaviors of the VP sensor to NO2 and N2O gases have been investigated, and the mechanism study shows that the adsorption energy, bond length of the gas molecule on the VP surface, and the decomposition of N2O led to the differential responses. This work is one of the pioneer studies of VP gas sensors and presents a new sensing method for the discriminative analysis of NO2 and N2O for greenhouse gas emission monitoring and air quality control.

Rapid isolation of anti-idiotype aptamers for quantification of human monoclonal antibodies against SARS-CoV-2 spike protein

Therapeutic antibodies that block viral entry have already proven to be important, first line drugs for treatments of viral infections. In the case of SARS-CoV-2, combinations of multiple therapeutic antibodies may need to be rapidly identified and formulated in a way that blocks each new, predominant variant of the virus. For efficient introduction of any new antibody combination into patients, it is important to be able to monitor patient-specific pharmacokinetics of individual antibodies, which would include the time course of their specific capacity to block the viral spike proteins. Here, we present three examples of microfluidic-based rapid isolation of companion reagents useful for establishing combination antibody therapies. These reagents are specific three-dimensional imprints of variable regions of individual human monoclonal antibodies against the -spike protein of SARS-CoV-2 virus in the form of oligonucleotide-based ligands (aptamers). We implement these anti-idiotypic aptamers as bioreceptors in graphene-based field-effect transistor sensors to accomplish label free, rapid, and sensitive detection of matching antibodies within minutes. Through this work we have demonstrated the general applicability of anti-idiotype aptamers as capture reagents in quantification of active forms of monoclonal antibodies in complex biological mixtures.